Eaton 2-Speed and Double Reduction Tandem Drive Axles.

Click here to Identify your axle

Select a Model (13 Models)

 

Available Ratios

DT341, DT402-(P) DP402-(P)
3.55/4.83 4.83
3.70/5.04 5.05
3.90/5.31 5.32
4.11/5.60 5.61
4.33/5.90 5.91
5.56/6.21 6.21
4.88/6.65 6.65
5.29/7.21 7.21
5.57/7.60 7.60
6.14/8.38 8.38
6.17/8.40 8.40
6.57/8.96 8.96
7.17/9.77 9.77


Available Ratios

DT451-P DP451-P
3.55/4.83 4.83
3.70/5.04 5.05
3.90/5.31 5.32
4.11/5.60 5.61
4.33/5.90 5.91
5.56/6.21 6.21
4.88/6.65 6.65
5.29/7.21 7.21
5.57/7.60 7.60
7.17/9.77 9.77


Available Ratios

DT461-P DP461-P
3.70/5.04 5.04
3.90/5.31 5.31
4.11/5.60 5.60
4.33/5.90 5.90
5.56/6.21 6.21
4.88/6.64 6.64
5.43/7.39 5.43
6.17/8.40 8.40


Available Ratios

DT521-P DP521-P
3.70/5.04 5.04
3.90/5.31 5.31
4.11/5.60 5.60
4.33/5.90 5.90
5.56/6.21 6.21
4.88/6.64 6.64
5.43/7.39 5.43
6.17/8.40 8.40


Available Ratios

DP581-P, DP601-P,

DP651-P, DP652-P
5.04
5.31
5.60
5.90
6.08
6.21
6.64
6.76
7.12
7.39
7.49
8.01
8.40
8.92
10.13

 

MODEL IDENTIFICATION

The Axle Gear Ratio can be located on the identification tag on the carrier assembly or on the axle tube.

 

Example: DT402–(P)

First Digit D = Forward Tandem Axle with Interaxle Differential

First Digit R = Rear Tandem Axle

Second Digit S = Single Reduction

Second Digit T = Dual Range

Second Digit P = Planetary Double Reduction

Second Digit C = Single Reduction with Controlled Traction Differential

Second Digit D = Single Reduction with Wheel Differential Lock

Second Digit A = Single Reduction with in Axle Speed Sensing

Third & Fourth Digits = GAWR x 1000 lbs.

Fifth Digit = Design Level

Sixth Digit (P) = Optional Lube Pump

Sixth Digit P = Standard Lube Pump

 

This page was last modified Thursday, March 05, 2009 09:02:44 PM

© Copyright 1994 - 2009 Vibrate Software - All Rights Reserved