Eaton Single Reduction Tandem Drive Axles.

Click here to Identify your axle

Select a Model (20 Models)

 

Available Ratios
DS344, DA344
2.64 2.85 3.08 3.25
3.36 3.55 3.70 3.90
4.11 4.33 4.63 4.88
5.29 5.57 6.17 6.50
DS404-(P), DA404-(P), DD404-(P), DS405-(P)
2.64 2.85 3.08 3.25
3.36 3.55 3.70 3.90
4.11 4.33 4.63 4.88
5.29 5.57 6.17 6.50
DS451-P, DC451
3.90 4.11 4.33 4.56
4.88 5.29 5.57  
DS454-P, DA454-P DD454-P
3.36 3.55 3.70 3.90
4.11 4.33 4.63 4.88
5.29 5.57    
DS461-P, DC461-P DD461-P
3.55 3.70 3.90 4.11
4.33 4.56 4.88 5.29
5.43 6.17    
DS521-P, DC521-P DD521-P
3.55 3.70 3.90 4.11
4.33 4.56 4.88 5.29
5.43 6.17    
DS581-P, DC581-P DD581-P
3.55 3.70 3.90 4.11
4.33 4.56 4.88 5.29
5.43      

MODEL IDENTIFICATION

The Axle Gear Ratio can be located on the identification tag on the carrier assembly or on the axle tube.

Example: DS404–(P)

First Digit D = Forward Tandem Axle with Interaxle Differential

First Digit R = Rear Tandem Axle

Second Digit S = Single Reduction

Second Digit T = Dual Range

Second Digit P = Planetary Double Reduction

Second Digit C = Single Reduction with Controlled Traction Differential

Second Digit D = Single Reduction with Wheel Differential Lock

Second Digit A = Single Reduction with in Axle Speed Sensing

Third & Fourth Digits = GAWR x 1000 lbs.

Fifth Digit = Design Level

Sixth Digit (P) = Optional Lube Pump

Sixth Digit P = Standard Lube Pump

 

This page was last modified Thursday, March 05, 2009 09:02:51 PM

© Copyright 1994 - 2009 Vibrate Software - All Rights Reserved